# Claude Howto — Guided Claude Code Learning Path

> Claude Howto is a visual, example-driven roadmap for Claude Code that ships copy-paste `.claude/` templates, quizzes, and a 15-minute quick start.

## Install

Copy the content below into your project:

## Quick Use

1. Install / set up:
   ```bash
   git clone https://github.com/luongnv89/claude-howto.git && cd claude-howto
   ```
2. Start / smoke test:
   ```bash
   mkdir -p /path/to/your-project/.claude/commands && cp 01-slash-commands/optimize.md /path/to/your-project/.claude/commands/
   ```
3. Verify:
   - In Claude Code, run `/optimize` and then `/self-assessment`; confirm you get actionable next steps based on your current level.

## Intro

Claude Howto is a visual, example-driven roadmap for Claude Code that ships copy-paste `.claude/` templates, quizzes, and a 15-minute quick start.

- **Best for:** Developers who installed Claude Code but want a structured path (commands → memory → skills → hooks → MCP)
- **Works with:** Claude Code; `.claude/commands`, project memory (`CLAUDE.md`), skills, hooks, subagents
- **Setup time:** 15 minutes

## Practical Notes

- Setup time ~15 minutes (clone + copy one slash command + try it)
- The repo references 10 learning modules and provides copy/paste templates under `.claude/`
- GitHub stars + forks (verified): see Source & Thanks

The most practical way to use this guide is to treat it like onboarding automation:

- Start with one slash command, then expand to memory (`CLAUDE.md`), then one skill.
- Keep all copied assets in your repo so teammates get the same behavior.
- Add hooks last, once you know what you want to enforce (formatting, tests, security checks).

If you're training a team, make the "15-minute quick start" a mandatory first task, then track progress by which commands/skills are installed and used weekly.

### FAQ

**Q: Do I need to read everything in order?**
A: No. Start with the 15-minute quick start, then follow modules based on your gaps.

**Q: What should I copy into my repo?**
A: At minimum: one command, a project `CLAUDE.md`, and one skill you’ll actually use.

**Q: How do I measure progress?**
A: Count installed commands/skills and whether they reduce review cycles or rework week over week.

## Source & Thanks

> Source: https://github.com/luongnv89/claude-howto
> License: MIT
> GitHub stars: 32,374 · forks: 3,950

---

<!-- ZH -->

## 快速使用

1. 安装 / 设置：
   ```bash
   git clone https://github.com/luongnv89/claude-howto.git && cd claude-howto
   ```
2. 启动 / 冒烟测试：
   ```bash
   mkdir -p /path/to/your-project/.claude/commands && cp 01-slash-commands/optimize.md /path/to/your-project/.claude/commands/
   ```
3. 验证：
   - 在 Claude Code 里先运行 `/optimize`，再运行 `/self-assessment`；确认能得到基于你当前水平的下一步建议。

## 简介

Claude Howto 是面向 Claude Code 的可视化学习路线：提供可直接复制的 `.claude/` 模板、模块化教程与自测指令，15 分钟即可把第一个命令/记忆/技能落地并减少走弯路。

- **适合谁：** 已装 Claude Code，但希望按“命令→记忆→技能→hooks→MCP”路线系统上手的人
- **可搭配：** Claude Code；`.claude/commands`、项目记忆（`CLAUDE.md`）、skills/hooks/subagents
- **准备时间：** 15 分钟

## 实战建议

- 准备时间约 15 分钟（克隆 + 复制一个 slash command + 立即试用）
- 仓库以模块化方式组织内容（10 个模块）并提供可复制的 `.claude/` 模板
- GitHub stars / forks（已核验）：见「来源与感谢」

最实用的用法：把它当作“入门自动化脚手架”。

- 先复制 1 个 slash command，再扩展到项目记忆（`CLAUDE.md`），再装 1 个 skill。
- 把复制过来的资产放进仓库，保证团队行为一致。
- hooks 建议最后上：先明确你要强制什么（格式化、测试、安全检查）。

如果是团队培训，把“15 分钟快速开始”设为必做任务，然后用“装了哪些命令/技能、每周用没用”来追踪落地情况。

### FAQ

**必须按顺序学完吗？**
答：不必。先完成 15 分钟快速开始，再按自己的短板选模块。

**最少要复制哪些东西？**
答：至少复制：1 个 command、项目 `CLAUDE.md`、以及 1 个真正会用的 skill。

**如何量化进展？**
答：统计安装/使用的命令与技能数量，并对比每周评审轮次或返工量是否下降。

## 来源与感谢

> Source: https://github.com/luongnv89/claude-howto
> License: MIT
> GitHub stars: 32,374 · forks: 3,950


---
Source: https://tokrepo.com/en/workflows/claude-howto-guided-claude-code-learning-path
Author: Prompt Lab